Kenwood NX-P500 User Manual

Also see for ProTalk NX-P500: User manual User guide User manual

Contents

45Function name Display Press HoldIndividual ReplyWhen you receive a Group Call,etc., while you are displaying the IDof the caller, you can call IndividualCall to the caller by pressingthe button that programmed thisfunction and then pressing PTTswitch.NoneMaintenanceEnter Maintenance Display Modeand display the signal strengthnumerically.NoneMonitorTurns the transceiver signalingoff, to listen to all calls that arereceived on the channel. Press thisbutton again to turn the transceiversignaling back on.Refer to {p.20}.NoneMonitorMomentaryTurns the transceiver signaling offwhile holding down this button.Release this button to turn thetransceiver signaling back on.While signaling is off, you canlisten to all calls that are receivedon the channel.Refer to {p.20}.NoneScanPress this button to start scanningthe transceiver channels. Refer to{p.34}.Adds or removes theselected Channelto or from the scansequence.Scan Delete/ AddAdds or removes the selectedChannel to or from the scansequence.NoneSecond PTTApart from the channel younormally select, you can set upanother channel as the mainchannel with a dedicated PTTswitch. Refer to {p.47}.NoneSpeakerAttenuation Speaker Attenuation NoneSquelch OffPress to hear background noise.Press this button again to returnto normal operation. Refer to{p.20}.NoneSquelch OffMomentaryContinuously hold down thiskey to hear background noise.Release this key to returnto normal operation. Refer to{p.20}.None