Kenwood Nexedge NX-300GE Instruction Manual

Also see for Nexedge NX-200G: Instruction manual Instruction manual Service manual Instruction manual Instruction manual

20■ ReceivingA calling ID or text message will appear when a Status callis received. Press any key to return to normal operation.■ Reviewing Messages in the Stack Memory1 Press the key programmed as [Stack], or press and holdthe key programmed as [Selcall], [Status], or [Selcall +Status] to enter Stack mode.• The last received message is displayed.2 Press / to select the desired message.• Message types are identifi ed as follows:I: Caller ID, S: Status Message, M: Short Message• Press and hold for 1 second or press to cycle thedisplay information as follows:ID Name > Status/Short Message > CH/GID > Time Stamp3 Press to return to normal operation.• To delete the selected message, press or #. To confi rmthe deletion, press or .• To delete all messages, press and hold or # for1 second. To confi rm the deletion, press or .SHORT/LONG MESSAGESReceived short messages are displayed the same as Statusmessages and are stored in the same stack memory.To send short messages, and to send and receive longmessages, you must connect the transceiver to a PC. Ask yourdealer for details.GPS REPORTGPS data can be manually transmitted by pressing the keyprogrammed as [Send the GPS data], or by accessing theMenu {page 13}. If set up by your dealer, GPS data may beautomatically transmitted at a preset time interval.• When using the GPS function, you must fi rst connect the VHF/GPS antenna or UHF/ GPS antenna.