4-5. CLOCK AND TIMERTIMER switchThis switch controls the time operation. When the TIMERswitch is ON, the timer has priority over the POWERswitch. If the radio will not turn on, check this switch!® CLOCK1 /OFF/CLOCK2 switchCLOCK 1 : Use this position, to display local time. Timeroperation is controlled by local time.OFF : In this position, nothing is displayed.CLOCK 2 : In this position, a second time zone may be en-tered for display. Timer-ON/OFF operation isnot controlled by clock 2 time. Set this clockto GMT or any other time zone that you wishto monitor.® TIME SET switchThis switch is used to set the timer and the clock time.® OFF TIME switchUse this switch to display the time that the radio has beenprogrammed to turn OFF.® ON TIME switchUse this switch to display the time that the radio has beenprogrammed to turn ON.® HOUR keySets the hours.© MINUTE keySets the minutes. Pressing this switch simultaneouslywith the HOUR switch resets the clock or timer.4-5-2. ClockThe R-5000 has two independent 24-hour clocks, CLOCK1 and CLOCK 2. The clock times may be viewed with thePOWER switch ON or OFF. Both methods are describedbelow.A. Clock selectionCLOCK 1 or CLOCK 2 is selected by the slide switch onthe front panel.a. When the POWER switch is ON.25