Kenwood R-SG7 Instruction Manual

Also see for R-SG7: Service manual

Kenwood R-SG7 Instruction Manual Manual pdf 39 page image

R-SG7/DP-SG7/X-SG7 (EN)39Preparation sectionBasic sectionApplication sectionKnowledge sectionsR.D.S.RDS is a system which transmits usefulinformation (digital data) for FM broadcaststogether with the broadcast signal. Tuners andreceivers designed for RDS reception can extractthe information from the broadcast signal for usewith various functions such as automatic displayof the station name.R.D.S. (Radio Data System)This unit is equipped with the followingfunctions utilizing RDS data:PTY (Program Type Identification) Search :‚The tuner automatically searches for a station which iscurrently broadcasting a specified program type (genre).PS (Program Service Name) Display : (See below.)When an RDS broadcast is received, the station name isautomatically displayed.EON (Enhanced Other Network) : wWhen the information to be received is set in advance andany RDS station in the same network starts broadcastingof such information, the reception automatically will beswitched to that station.The “RDS” indicator lights up whenan RDS broadcast (signal) is received.* Some functions may not be provided or be givendifferent names depending on countries or areas.To switch the display contentsRDSDISPLAYPressing the DISPLAY keychanges the display contents.Display mode priority ranking1 PS (Program Service Name) Display :When an RDS broadcast is received, thestation name is automatically displayed.If no PS data was sent, “NO PS” is displayed.2 Frequency Display :The frequency of the current station is displayed.For reception of RDS stations, the RDS autopresetting function must be used to preset thestations.“NO DATA” will be flashed when a station notpreset by auto presetting is received. ¶B B C 1 F MTUNEDST.AUTO RDSB B C 1 F MTUNEDST.AUTO RDSF M 1 ) 2 5 ).TUNEDST.AUTO RDSMHzLights