R-SG7/DP-SG7/X-SG7 (EN)45Preparation sectionBasic sectionApplication sectionKnowledge sectionsTimer operationTimer operationAdjust the clock before setting the timer. rOperate easy To use Timer (O.T.T.)Playback of the selected input source starts at the specified time, and the power is switched off after onehour. This timer operates only once directly after setting.Sleep timerThe power is turned OFF automatically after the specified period has elapsed.Timer playback, timer recordingPlayback of the selected source (or broadcast recording) will be executed for the set time.AI timer playbackWhen timer playback starts, the volume increases gradually.Operate easy To use Timer (O.T.T.)Timer playback is possible simply by setting the time.The source selected last before the power was switchedoff will be played. One hour after start of timer play-back, the power will be switched off automatically.1 Select the source to be played and set thevolume.2 Switch OFF the power supply.3 Press the “tuning (fi)” key.4 Set the ON time.5 Press the “enter” key.The program timer does not operate duringplayback by the O.T.T. timer.÷ When the “tuning (fi)” key is pressed, the input sourcewill be displayed, and after a few seconds, the ON timewill be displayed.÷ The ON time can be set in steps of 5 minutes.÷ In case of combination with another timer, the inputsource which operated last will be played.Press the “tuning (fi)” key twice while thepower is OFF.To cancelBlinksON time display R-SG7Adjust the clock before setting the timer.Sleep timerSet the number of minutes after which the poweris to be turned OFF.1 Turn the power ON.2 Set the time.Turn the power OFF or press the SLEEP key untilthe sleep time is cancelled.To cancel÷ The power is turned OFF automatically after the set timehas elapsed.÷ Each press decreases the time by 10 minutes. Themaximum time that can be set is 90 minutes.90=80=70...30=20=10=Cancel=90=80...Duration for sleep timerLights R-SG7A M 7 ) ): O.T.T.SLEEP9 )tuningvolumecontrolpure A∞ ∞down upSLEEPTo decreasethe figureTo increasethe figureenter