Kenwood RDX-VH7 Instruction Manual

Also see for RD-VH7: Service manual

Kenwood RDX-VH7 Instruction Manual Manual pdf 57 page image

RD-VH7/X-VH7 (EN)57Important ItemsPrecautions and Notes1. Switch the power ON.2. Select the CD input, wait for a few seconds andensure that the LCD becomes as shown in thefigure below. If a disc is left in the CD player,press the “0 eject” key to eject it.3. Turn the power OFF.Note related to transportation and move-mentBefore transporting or moving this unit, carry outthe following operations.NOMDISCCDDolby noise reduction manufactured under licensefrom Dolby Laboratories. “DOLBY” and the double-Dsymbol are trademarks of Dolby Laboratories.WARNING NOTICE:IN MOST CASES IT IS AN INFRINGEMENT OF COPY-RIGHT TO MAKE COPIES OF TAPES OR DISCS WITH-OUT THE PERMISSION OF THE COPYRIGHT OWN-ERS. ANYONE WISHING TO COPY COMMERCIALLYAVAILABLE TAPES OR DISC SHOULD CONTACT THEMECHANICAL COPYRIGHT PROTECTION SOCIETYLIMITED OR THE PERFORMING RIGHTS SOCIETYLIMITED.Stored contents whichare cleared immediatelywhen power plug is un-plugged from power out-letClock displayStored contents whichare cleared in at least aday after power plug isunplugged from poweroutletPOWER status (ON orOFF)Input selectionVolume control valueReceiving bandFrequencyPreset stationsProgram settingsMemory backup functionWhen your unit needs to be repaired, bring the entireset (Speakers excluded) to your dealer.Caution on condensationCondensation (of dew) may occur inside the unit whenthere is a great difference in temperature between thisunit and the outside.This unit may not function properly if condensation oc-curs. In this case, leave the unit for a few hours withthe power left ON, and restart the operation after thecondensation has dride up.Be specially cautious against condensatin in a fol-lowing circumsatance:When this unit is carried from a place to another acrossa large difference in temperature, when the humidity inthe room where this unit is installed increases, etc.REFERENCE INFORMATIONThe HDCD system was manufactured based on the ap-proval of Pacific Microsonic. The patent numbers are asfollows: in America: 5,479,168; 5,638,074; 5,640,161;5,808,574; 5,838,274; 5,854,600; and 5,872,531. In Aus-tralia: 669114. Others: Patent pending.