Kenwood RV-7000 Instruction Manual

Contents

14 RV-7000/RV-6000/RA-5000ConnectionsSpeaker placementRV-7000 (Surround Back speaker)Center speakerFront speakerSubwooferListeningpositionSurround speakerFront speakerSurround speakerSurround Back speakerRV-7000 (Front Height speaker)Center speakerFront speakerSubwooferListeningpositionSurround speakerFront speakerSurround speakerFront Height speakerRV-6000Center speakerFront speakerSubwooferListeningpositionSurround speakerFront speakerSurround speakerSurround Back speakerNotes on connectionsWhen connecting the related system components, be sure torefer to the instruction manuals supplied with the componentsyou are connecting.• Be sure to remove the power cord from the AC outletbefore plugging or unplugging any connection cords.Plugging/unplugging connection cords withoutdisconnecting the power cord can cause malfunctionsand may damage the unit.• Be sure to insert all connection cords securely. If theirconnections are imperfect, the sound and video may notbe produced or there will be noise interference.• If this unit is installed in the proximity of a source ofmagnetism such as a magnet, color irregularities due tointerference with the speakers may be observed on theTV monitor screen. Be careful in the installation.Microcomputer malfunctionIf operation is not possible or an erroneous display appears,even though all connections have been made properly, reset themicrocomputer by referring to .T¤CAUTIONThe power of this equipment will not be completely cut offfrom the wall outlet when the power switch is turned off.Install the equipment so that the wall outlet is easilyaccessible and, in case of emergency, immediately unplug thepower cord from the wall outlet.¤CAUTIONBe sure to adhere to the following, or proper ventilationwill be blocked causing damage or fire hazard.• Do not install the unit on the rear, side or top panel.• Do not cover the unit with a cloth or install the unit on acarpet or mattress.• Do not install the unit in a poorly ventilated place.• Leave some space around the unit (from the largest outsidedimension including projection) equal to or greater than,shown below.Top panel : 50 cmSide panel : 10 cmBack panel : 10 cm¤CAUTIONDo not connect the power cord to a wall outlet until allconnections are completed.