Kenwood RV-7000 Instruction Manual

Contents

8 RV-7000/RV-6000/RA-5000Before useSpeaker setup(Detailed Setup)The detailed settings allow you to enjoy full performance ofthe receiver according to the environment of your listeningroom.For creating the best listening environment, Kenwoodrecommends to perform the setup at the listening position.6(78308/7,&21752/Speaker setup flowSpeaker settings consist of 7 elements.1 Enter the Detailed Setup mode.[SETUP]Use [MULTI CONTROL O/] to select an item to set.[SETUP]Elements Display SettingSpeaker Configuration "SP SETUP" Selects whether each speaker channel isused or, if used, its size.Speaker Level "TESTTONE" Selects the output level from eachspeaker.Speaker Distance "DISTANCE" Selects the distance between eachspeaker and the listening position.Crossover "CROSSOVER"Sets the lower limit of the bassfrequencies reproduced from the speakersset to "NML" in the "SP SETUP". Thefrequencies below the frequency set hereare distributed to other speakers (thoseset to "LRG" and the subwoofer).2 Set each item.See the followings for each setup item.Playback92/80( ,13876(/(&725/92/80(&21752/1 Select a source.Use the Input source keys on the remote control unitto select a source.Or use [INPUT SELECTOR] key on the main unit.Example: Display when HDMI 1 input source isselected2 Start playback from the selected source.3 Use [VOLUME /o] to adjust the volume.4 Enjoy various surround effects.You can enjoy a variety of listen modes. (See G.)The surround effects can be fine tuned accordingto the selected input source. (See according to the playing source> E.)t If the input signal uses a number of channels largerthan the number of speakers in use, the signals aredistributed automatically according to the availablespeakers.ContinuedInput source keyse tote ]sHow to read this manualThe operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When thesame operation is also available on the main unit, the operating method is indicated in illustrations.The [VOLUME CONTROL] knob on the main unit are operated by turning the knobs clockwise or counterclockwise.The knob on the main unitis pointed with an arrow toindicate that it can be turnedin either direction.The keys and controls used inthe operations described in eachsection are indicated with theirnames.The descriptions of the functionsavailable only on the remotecontrol unit are accompanied onlywith the illustration of the remotecontrol unit. The descriptions ofthe functions available only on themain unit are accompanied onlywith the illustration of the mainunit.The names of the operated keysor knobs are enclosed insidebrackets.This icon indicates supplementaryinformation, restrictions inoperation or tips on operation.When a key is used to selectan option, the list of options isshown in the form of a table.This icon indicates that thedescription continues on thenext page.• In this manual, RV-7000 is used for the illustrations of front panel and rear panel.• The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and maydiffer from the actual view or operation.This icon indicates that the function can be operated (orrecommended to operate) only with the unit displayed with the icon.: main unit : remote control unit