Kenwood Sovereing DV-5700 Instruction Manual

Also see for Sovereing DV-5700: Service manual Service manual Instruction manual

Contents

Kenwood Sovereing DV-5700 Instruction Manual Manual pdf 55 page image

Various Setups55Chapter 6: Various SetupsOperation procedure1. Set the mode switch of the joystick remote to thePurple position.2. While the player is in stop mode, press SET UP1 and tiltthe joystick up or down to display the "SOUND"menu of "SET UP MENU".3. Press ENTER to open the setup menu.4. In the setup menu, select "Digital Audio DolbyDigital" by tilting the joystick up or down and pressENTER .7 Bitstream7 PCM7Digital AudioDolby DigitalSpeaker Setting (Custom)Speaker Setting (Quick)Audio During SearchDynamic Range ControlAudio FilterDTSMPEGPCM Down Conversion5. Select the audio output by tilting the joystick up ordown, and press ENTER to enter the selection inmemory."Digital Audio DTS" SettingWhen a DVD or DTS-CD recorded in DTS is played, thissetting makes it possible to select the audio signal outputfrom the digital output connector.At the factory, the player has been set to "Bitstream" toenable digital connection to an AV amplifier with built-in DTS decoder. For the nonexistent decoders, set the"Digital Audio" setting to "PCM".Setting items" " : Select to return to the previous screen."Bitstream" : The signal is output as a bitstream.Select when connecting a component containingDTS decoder."PCM" : The signal is converted onto 48 kHz (2CH.)PCM signal before being output. Select whenconnecting a component without DTS decoder.Operation procedure1. Set the mode switch of the joystick remote to thePurple position.2. While the player is in stop mode, press SET UP1 and tiltthe joystick up or down to display the "SOUND"menu of "SET UP MENU".3. Press ENTER to open the setup screen.4. In the setup menu, select "Digital Audio DTS" bytilting the joystick up or down and press ENTER .77 Bitstream7 PCMDigital AudioDolby DigitalSpeaker Setting (Custom)Speaker Setting (Quick)Audio During SearchDynamic Range ControlAudio FilterDTSMPEGPCM Down Conversion5. Select the audio output by tilting the joystick up ordown, and press ENTER to enter the selection inmemory.