Kenwood Sovereing DV-5700 Instruction Manual

Also see for Sovereing DV-5700: Service manual Service manual Instruction manual

Contents

Kenwood Sovereing DV-5700 Instruction Manual Manual pdf 56 page image

Various Setups56Chapter 6: Various Setups"Digital Audio MPEG" SettingWhen a DVD recorded in MPEG Audio is played, thissetting makes it possible to select the audio signal outputfrom the digital output connector.At the factory, the player has been set to "Bitstream" toenable digital connection to an AV amplifier with built-in MPEG decoder. For the nonexistent decoders, set the"Digital Audio" setting to "PCM".Setting items" " : Select to return to the previous screen."Bitstream" : The signal is output as a bitstream.Select when connecting a component containingMPEG decoder."PCM" : The signal is converted onto 48 kHz (2CH)PCM signal before being output. Select whenconnecting a component without MPEG decoder.Operation procedure1. Set the mode switch of the joystick remote to thePurple position.2. While the player is in stop mode, press SET UP1 and tiltthe joystick up or down to display the "SOUND"menu of "SET UP MENU".3. Press ENTER to open the setup screen.4. In the setup menu, select "Digital Audio MPEG" bytilting the joystick up or down and press ENTER .7 Bitstream7 PCM7Digital AudioDolby DigitalSpeaker Setting (Custom)Speaker Setting (Quick)Audio During SearchDynamic Range ControlAudio FilterDTSMPEGPCM Down Conversion5. Select the audio output by tilting the joystick up ordown, and press ENTER to enter the selection inmemory."Speaker Setting"When an associated system component is connected tothe 6CH. OUTPUT jacks of the player, this setting isrequired on the player.At the factory, the player has been set to the standardsetting with which the speakers can reproduce the 6-channel signals as soon as the connections are made.This setting can be changed according to each listeningenvironment. When you want to change this setting, besure to perform it in the listening area in your ownlistening environment.¶ For the "Speaker Setting" when an AV amplifieris connected digitally to the player, refer to theinstruction manual of the AV amplifier."Speaker Setting (Quick)"Three kinds of speakers can be set, including the "CenterSpeaker", "Surround Speakers" and "SubWoofer".Operation procedure1. Set the mode switch of the joystick remote to thePurple position.2. While the player is in stop mode, press SET UP1 and tiltthe joystick up or down to display the "SOUND"menu of "SET UP MENU".3. Press ENTER to open the setup screen.4. In the setup menu, select "Speaker Setting (Quick)"by tilting the joystick up or down and press ENTER .5. Place the cursor on the speaker name you want to setto "Use" or "Do not use", then press the ENTER button.