Kenwood TH-79E Instruction Manual

Also see for TH-79A: Instruction manual Instruction manual Instruction manual

From The N3UJJ.COM Document LibraryFrom The N3UJJ.COM Document Library5 Press [STEP] to store the selected value and exit.• VFO mode is restored.Note;• The step size can be set separately for the VFO, Call channel,and memory channels.• When using the UHF/UHF configuration, the frequency steps of5kHz and 15kHz cannot be selected on the A band (upperDisplay). Only 10kHz, 20kHz, 12.5 kHz, and 25kHz can beselected.• 1 MHz Frequency Step?nThe 1 MHz Step function allows rapid frequencyexcursions up or down the band with a minimum ofkey strokes.1 Press [BAND] to select the Operating band.2 Press [VFO] to select VFO mode.3 Press [MHz].4 Turn the ENC control to select tlhe desired MHzdigit.5 Press [MHz] to restore the previous frequencystep.Note: 1 MHz Step does not work in Memo.ry Recall or Callchannel inodes.• Changes in Displayed FrequenciesChanging between step sizes may result in achange of the displayed frequency. When a change1occurs, and by how much, is shown in theaccompanying charts.5, 10, 15, or 20kHz Step -ct12.5 or 25kHz StepBefore AHer(10 kHl/ 1 kHz Digits) (1 0 kHl/ 1 kHz Digits)00,05, 10,15 00-·..-··· ....20,25,30,35 2540,45,50,55 5060,65, 70, 75,80,85,90,95 7512.5, or 25 kiHz Step -ct 5, 10, 15, or 20kHz StepBefore AHer(1 0 kHl/ 1 kHl/ 500 Hz Dlglls) (10 kHl/ 1 kHz Digits)00 0012.5 10----·--- --25 20---·--- ------·37.5 30r-- -·----50 5062.5 6075 7087.5 80