Kenwood TH-D72A Instruction Manual

Also see for TH-D72A: Instruction manual User manual Instruction manual Instruction manual Service manual

[ ], [ ]Press [ ] or [ ] to select an operating frequency, Memory channel, Menunumber, setting value or to change the scan direction, etc.The [ ]/ [ ] keys function in the exact same way as the Tuning control.These keys change frequencies, memory channels, or other selections,depending on the current transceiver mode.[ OK]Press [ OK] to move to the next step or to complete the setting in variousselection modes such as Function Select or Menu mode.[ESC ]Press [ESC ] to move back to the previous step or to quit the setting invarious selection modes such as Function Select or Menu mode.[A/B]Press [A/B] to select operation band A or B.Press [F], [A/B] to select a frequency band.[MENU]Press [MENU] to enter Menu mode.Press [F], [MENU] to cycle the transmit output power between: High Power–> Low Power –> Economic Low Power.[F]Press [F] to enter Function mode.Press [F] (1s) to turn the transceiver key lock function ON and OFF.[VFO]Press [VFO] to enter VFO mode, then press [ ]/[ ] or rotate the Tuningcontrol to select an operating frequency.Press [F], [VFO] to copy the current Memory channel or Call channel to theVFO (memory shift).[MR]Press [MR] to enter Memory Channel mode, then press [ ]/[ ] or rotate theTuning control to select a Memory channel.Select a Memory channel, then press [F], [MR] to store the current operatingfrequency in the Memory channel.[CALL]Press [CALL] to select the Call channel.Press [F], [CALL] to store the current operating frequency to the Call channel.