Kenwood TH-D72A Instruction Manual

Also see for TH-D72A: Instruction manual User manual Instruction manual Instruction manual Service manual

36OPTIONSThe following options are available for use with this transceiver:• PB-45L Li-ion battery pack• BT-15 Battery case• KSC-32 Rapid charger• SMC-32 Speaker microphone• SMC-33 Speaker microphone• SMC-34 Speaker microphone• HMC-3(G) Headset• KHS-21 Headset• KHS-29F Headset• EMC-7 Clip microphone• HS-9(G) Earphone• PG-3J Cigarette lighter cord• PG-2W DC cable• PS-60 DC Power SupplyNote: Optional accessories for use with this transceiver may change, post-production. (Newoptions may become available and/or current options may be discontinued.) Please refer to theoptions catalog(s) for applicable transceivers.MeMOry cONTrOl PrOgraM McP-4aThe following functions can be set only by using the MCP-4A software:• SQC active condition• Input/output level (DATA terminal)• 10 MHz mode selection• Power on password valueUsing the MCP-4A software, you can:• View memory channel groups• Name memory groups• Save/load settings• Read exported TravelPlus for Repeaters™ files issued from the ARRL™(There are some version restrictions; refer to the help text of the MCP-4A.)• Print/export memory and various settings in html(TravelPlus for Repeaters is a trademark of ARRL.)To download the MCP-4A software, go to:http://www.kenwood.com/i/products/info/amateur/software_download.htmlNote: This URL may change without notice.Using the McP-4a Software1 Follow the directions of the installer to install the software.2 Set up the PC COM port and baud rate.3 The transceiver data is read from the MCP-4A software.4 Select your desired settings, then write the data to the transceiver.