Kenwood TK-2180 Instruction Manual

Also see for TK-2180: Specifications Brochure & specs Instruction manual Instruction manual Service manual

17To enter the password without using the DTMF keypad:1 Rotate the selector to select a digit.2 Press the C> key to accept the entered digit and moveto the next digit.• Press the A or # key to delete an incorrect character.Press and hold the A or # key to delete all enteredcharacters.3 Press the S key to confirm the password.• If you enter an incorrect password, an error tone soundsand the transceiver remains locked.ADJUSTING THE VOLUMERotate the Power switch/ Volume control to adjust the volume.Clockwise increases the volume and counter-clockwisedecreases it.SELECTING A ZONE AND C HANNELSelect the desired zone using the selector or the keysprogrammed as Zone Up/ Zone Down.Select the desired channel using the selector or the keysprogrammed as CH/GID (Channel/ Group ID) Up/ CH/GID(Channel/ Group ID) Down.Names can be programmed for zones and channels with up to12 characters each. However, to fit on the display, names willbe abbreviated. Your dealer can set the zone name to a lengthof 0 to 12 digits. Channel names will shorten appropriately, tofit in the 12-digit display.For example, if the channel name is “–CHANNEL1–” and thezone name is “KENWOOD”, and your dealer sets the zonename to 3-digits, the following display will appear: