Kenwood TK-2360 Service Manual

Also see for TK-2360: Instruction manual Instruction manual Instruction manual Instruction manual

Contents

TK-236083. Mounting the Chassis to the CaseAssembly1. Mount the holder q to the chassis w.Confirm that the holder is securely locked to the chassis.2. Insert the packing e to the phone jack side of the chas-sis.Confirm the mounting direction of packing.Confirm that the packing is securely inserted to the chas-sis and SP/MIC jack.3. Insert the packing r to the chassis.Confirm that the packing is securely inserted to the chas-sis and that it does not protrude out.4. Insert the upper part of the chassis into the case assem-bly t.5. Press the chassis and the case assembly together to at-tach them..@;:BWNGREREDBLK@=4. Attaching the Antenna Receptacle tothe ChassisScrew the antenna receptacle to the chassis in the ordershown in the drawing so that the antenna receptaclecomes to the center of the case hole.Tighten this screw first.Tighten this screw second.5. The Nuts of the Volume Knob andChannel KnobNote that the shapes and heights of nuts of the volumeknob and channel knob are different from one another.Use the following jig when removing the nuts of the vol-ume knob and channel knob.• Jig (Part No.: W05-1012-00)Volume knob(Long)Channel knob(Short)DISASSEMBLY FOR REPAIR