Kenwood TK-3000 Service Manual
Also see for TK-3000: Instruction manualQuick manualInstruction manualInstruction manualInstruction manual
                                                   | |
TK-300091. Separating the Case Assembly from theChassis1. Remove the two knobs (a).2. Remove the two screws (b).3. Expand the right and left sides of the bottom of the caseassembly, Iift the chassis, and remove it from the caseassembly (c).4. Taking care not to cut the speaker lead (d), open thechassis and case assembly.Note:Solder the speaker wire back in its original position if youhave removed it.d–+BRN /GRN /a abbc1. 从机架上分离外壳1. 取下两旋扭 (a)。2. 取下两颗螺钉 (b)。3. 掀开外壳底部的左右两侧，取下机架，并外壳中取出 (c)。4. 小心不要折断扬声器引线 (d)。拆下机架和外壳。注意 :如果取下了扬声器的导线，请将其焊接到原位上。绿色褐色DISASSEMBLY FOR REPAIR / 维修拆卸 |
Related manuals for Kenwood TK-3000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine