Kenwood TK-3160 Instruction Manual

Also see for TK-2160: Service manual Specifications Instruction manual Specifications Service manual

8INSTALLING/ REMOVING ALKALINE BATTERIES◆ Do not install batteries in a hazardous environment where sparkscould cause an explosion.◆ Never discard old batteries in fire; extremely high temperaturescan cause batteries to explode.◆ Do not short circuit the battery case terminals.◆ Do not use commercially available rechargeable batteries.Note:◆ If you do not plan to use the transceiver for a long period, removethe batteries from the battery case.◆ This battery case has been designed for transmitting at a powerof approximately 1 W (the low power setting on your transceiver).If you want to transmit a stronger signal (using the high powersetting on your transceiver), use an optional rechargeable batterypack.1 To open the battery case,press on the 2 tabs on theupper rear of the case thenpull the 2 halves apart.2 Insert 6 AA (LR 6) alkalinebatteries into the batterycase.• Be sure to match the polaritieswith those marked in the bottomof the battery case.3 Align the tabs of the coverwith the base, then pushdown on the cover until itlocks in place.