Kenwood TK-5810H Service Manual

Also see for FleetSync TK-5810(H): Instruction manual Specifications Service manual Instruction manual

Contents

21TK-5810H(B)ADJUSTMENT2. Max [Panel test mode] Power Final VR1 107W ±2Wpower 1) CH-Sig:1-1 meteradjust PTT:ON Ammeter•TK-5810H K•TK-5810H K2 1) CH-Sig:1-1PTT:ON3. High power [Panel tuning mode] Front [PF3], [WL HPW] :100W ±1Wadjust 1) Adj item:[W HPW] panel [PF4] [WLC HPW] :100W 28A or lessAdjust:[***] [WC HPW] :100W•TK-5810H K 2) Adj item:[WL HPW]t [WLH HPW] :100W[WLC HPW]t[WC HPW]t [WH HPW] : 60W[WCH HPW]t[WH HPW]•TK-5810H K2 Adjust:[***] 100W ±1WPTT:ON 28A or lessPress [PF5] to store the adjust-ment value after adjustment.4. Low power 1) Adj item:[W LPW] 50W ±1Wadjust Adjust:[***] 15A or less•TK-5810H K 2) Adj item:[WL LPW]t[WLC LPW]t[WC LPW]t[WCH LPW]t[WH LPW]Adjust:[***]•TK-5810H K2 PTT:ONPress [PF5] to store the adjust-ment value after adjustment.Measurement AdjustmentItem Condition Test- Unit Terminal Unit Parts Method Specifications/RemarksequipmentTransmitter Section (For other adjustments, refer to TK-5810(B)(B51-8780-00 service manual).)Measurement AdjustmentItem Condition Test- Unit Terminal Unit Parts Method Specifications/Remarksequipment1. RX [Panel tuning mode] SSG Rear ANT Front [PF3], Enter the following Note: After replacing theFront-end 1) Adj item:[W FEND] panel panel [PF4] adjustment values EEPROM (IC701)adjust Adjust:[***] to the transceiver align RX Front-end.2) Adj item:[WL FEND]t by pressing [PF3][WLC FEND]t[WC FEND]t and [PF4] keys.[WCH FEND]t[WH FEND] [WL FEND] : 210 K: 205 K2[WLC FEND] : 175 K: 155 K2[WC FEND] : 130 K: 115 K2[WCH FEND] : 95 K: 80 K2[WH FEND] : 65 K: 50 K2After setting theadjustment value,press [PF5] key.The adjustmentvalue will be storedin memory.Receiver Section