16DTMF CALLSYou can make DTMF calls using the optional KMC-28 DTMF microphone.■ Manual DialingTo dial a number manually:1 Press and hold the PTT switch.ï If Keypad Auto PTT is enable, you do not need to press the PTT switch (pleaseconsult your dealer for enabling this function).2 Press the desired DTMF keys.■ RedialingA maximum of 16 digits can be redialed. The last number dialed, eithermanually or automatically, will be redialed.To redial a number:1 Press the key.ï An ìAî will appear on the display.2 Press the 0 key.ï The transceiver will redial the last number, and the digits will appear on thedisplay.Note:If the transceiver power is switched OFF, the redial memory will be erased.■ Auto DialingNote:Auto dialing is either enabled or disabled by your dealer.Store:To store a number in memory:1 Press the # key.ï A ìDî will appear on the display.2 Press the desired DTMF keys to enter a maximum of 16 digits.ï Press and hold the PTT switch, then press 2, 5, 8, 0, , or # to enter A, B, C,D, , or # (respectively).3 Press the # key.4 Select the desired memory channel by pressing a DTMF key (1 ~ 9).ï The number entered in step 2 will be stored in the memory channel selected.