Kenwood TK-7100 Instruction Manual

Also see for TK-7100: Specifications Specifications Service manual Instruction manual Instruction manual

Contents

11DELETE FROM SCAN/ A DD TO S CANDepending on how your transceiver has been set up, a key may have beenprogrammed with the Del/Add function. This function allows you to scan onlythose channels which you desire.To temporarily remove (or add) a channel from the Scan list, press and hold theDel/Add key for approximately 1 second during Scan, while Scan is paused onthe undesired (or desired) channel, to temporarily remove (or add) that channelfrom the scanning sequence. After switching the Scan function OFF, or switchingthe transceiver OFF and then ON again, the Scan settings return to normal.To permanently remove (or add) a channel from the Scan list, while notscanning, select the undesired channel then press and hold the Del/Add key forapproximately 1 second.The A icon appears on the display when the selected channel is added to theScan list. The A icon disappears when the channel is removed from the Scanlist.REVERT C HANNELDuring Scan, pressing the PTT switch to transmit will cause the transceiver toselect the revert channel. Your dealer programs the Revert channel for yourtransceiver with one of the following four types:• Selected: The last channel selected is assigned as the new revert channel.• Selected + Talkback: If the channel has been changed during Scan, thenewly selected channel is assigned as the new revert channel, but while thetransceiver is paused on a channel, pressing the PTT switch will allow you totransmit (talk back) on the current channel.• Priority: If your dealer has programmed a Priority channel, this channel is therevert channel.• Priority + Talkback: If your dealer has programmed a Priority channel, thischannel is the revert channel, but while the transceiver is paused on achannel, pressing the PTT switch will allow you to transmit (talk back) on thecurrent channel.