Kenwood TK-7100 Instruction Manual

Also see for TK-7100: Specifications Specifications Service manual Instruction manual Instruction manual

Contents

12DTMF CALLSNote: To make DTMF calls, you must have an optional microphone with a DTMF keypad (KMC-32).STORE & S END1 Enter the desired digits on the microphone keypad.• You can enter a maximum of 16 digits (0 ~ 9, A ~ D, , and #).• The digits appear on the display as you enter them.• If Keypad Auto-PTT is enabled by your dealer, this method of entering a string ofdigits will not function. Refer to “M ANUAL D IALLING ”, below.2 Press the PTT switch to transmit the entered digits.M ANUAL D IALLINGPress and hold the PTT switch, then enter the digits on the microphone keypad.• You can enter the digits 0 ~ 9, A ~ D, , and #. (A ~ D may be disabled by your dealer.)• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTTswitch while entering digits; the transceiver will transmit the DTMF tones automaticallyas you enter the digits.STORING DTMF N UMBERSIf Auto Dialling has been activated by your dealer, you can store DTMF numbers(16 digits maximum) in each of the 9 Auto Dial memory locations (1 ~ 9).1 Press the microphone # key.• “ ” appears on the display.2 Enter the desired digits on the microphone keypad.• You can enter the digits 0 ~ 9, A ~ D, , and #.• When entering “#”, you must first press the PTT switch.• To cancel, press any key on the transceiver front panel, other than the switch.3 Press the microphone # key, then enter a memory location number (1 ~ 9).