Kenwood TK-7102H Instruction Manual

Also see for TK-7102H: Specification Service manual Service manual Service manual

Contents

6BASIC OPERATIONSS WITCHING P OWER ON/ OFFPress the switch to switch the transceiver ON.Press and hold the switch for approximately 1 second to switch thetransceiver OFF.A DJUSTING THE V OLUMEPress the ▲ key to increase the volume and the ▼ key to decrease the volume.S ELECTING A C HANNELSelect your desired channel by pressing a key from 1 to 4.TRANSMITTINGNote: Before transmitting, first monitor the channel to make sure it is not already in use.1 Select your desired channel by pressing a channel key (1 ~ 4).ï If the channel is busy, wait until it becomes free.2 Press the microphone PTT switch and speak into the microphone. Releasethe PTT switch when you have finished speaking.ï For best sound quality at the receiving station, hold the microphone approximately1.5 inches (3 ~ 4 cm) from your mouth.R ECEIVING1 Select your desired channel by pressing a channel key (1 ~ 4).2 When you hear a signal, readjust the volume level if necessary.3 Respond to the call as described in step 2 of ìT RANSMITTING î, above.