Kenwood TK-7160 Instruction Manual

Also see for TK-7160: Instruction manual Service manual Specifications Brochure & specs Service manual

Contents

11SELECTING A ZONE AND C HANNELSelect the desired zone using the keys programmed as Zone Up and ZoneDown.ï The default setting for the key is Zone Up.ï The default setting for the key is Zone Down.Select the desired channel using the keys programmed as Channel Up andChannel Down.ï The default setting for the key is Channel Down.ï The default setting for the C> key is Channel Up.Names of up to 8 characters in length can be programmed for channels.TRANSMITTINGNote: Before transmitting, first monitor the channel to make sure it is not already in use.1 Select your desired zone and channel (above).ï If the channel is busy, wait until it becomes free.2 Press the microphone PTT switch and speak into the microphone in yournormal voice. Release the PTT switch when you have finished speaking.ï For best sound quality at the receiving station, hold the microphone approximately1.5 inches (3 ~ 4 cm) from your mouth.RECEIVING1 Select your desired zone and channel (above).2 When you hear a signal, readjust the volume level if necessary.ï Your dealer may have programmed an encode and decode tone pair on yourtransceiver. If your selected channel is programmed with these tones, you will hearcalls only when another party in your system makes a call. All other calls will notbe heard.3 Respond to the call as described in step 2 of ìT RANSMITTING î, above.