TK-7160/7162107. Ignition Sense Cable (KCT-18)The KCT-18 is an optional cable for enabling the ignitionfunction. The ignition function lets you turn the power to thetransceiver on and off with the car ignition key.7-2. Connecting the KCT-18 to the Transceiver1. Install the KCT-39 in the transceiver. (See the KCT-39 sec-tion)2. Insert the KCT-18 lead terminal ( 1 ) into pin 2 of the KCT-39 ( 2 ).211315137-3. Modifying the TransceiverModify the transceiver as follows to turn the power on andoff with the ignition key.1. Remove the resistor R95 of the TX-RX unit.■ Setting With the KPG-99D(E)Select “Function port” from the “Edit” menu and enablethe “Ignition Sense”.Fig. 7Fig. 8REALIGNMENT / DISASSEMBLY FOR REPAIR1. When you remove the panel, turn the transceiver up sidedown. Detach the panel by lifting the tabs as shown be-low.2. To remove the cabinet, first turn the transceiver up sidedown. Detach the cabinet by prying the tabs as shownbelow.3. When mounting the front panel, match the 4 tabs of thechassis with the panel, being sure they attach securely.Fig. 1Fig. 2Fig. 3TabsTabsTabsTabsTabsTX-RX UNITComponent sideCN2R95