TK-716011INSTALLATION / DISASSEMBLY FOR REPAIR2. External Speaker (Option)2-1. KES-3The KES-3 is an external speaker for the 3.5-mm-diameterspeaker jack.■ Connection Procedure1. Connect the KES-3 to the 3.5-mm-diameter speaker jackon the rear of the transceiver.2-2. KES-5External speaker KES-5 can be installed for KAP-2. If KES-5 is installed, it can be set by changing the CN1 short pin frompins 4 and 5 to pins 5 and 6 on the KAP-2.CN1 Connect Set Up4-5 INT. SP or KES-35-6 KES-5■ Connection ProcedureInsert the crimp terminal into the Square plug suppliedwith the KAP-2.45 E59-0419-05Black/WhiteleadBlack leadF29-0481-051. When you remove the panel, turn the transceiver up sidedown. Detach the panel by lifting the tabs as shown be-low.Tabs2. To remove the cabinet, first turn the transceiver up sidedown. Detach the cabinet by prying the tabs as shownbelow.TabsTabs3. When mounting the front panel, match the 4 tabs of thechassis with the panel, being sure they attach securely.TabsTabsFig. 7Fig. 1Fig. 2Fig. 3