Kenwood TK-7180 Instruction Manual

Also see for TK-7180: Modification Information Function reference Brochure & specs Specification Service manual

11SCAN R EVERTYou can select Revert zones and channels using the Zone and CH/GID keys.Eight types of Scan Reverts which can be programmed by your dealer areavailable.• Last Called Revert: The last zone/ channel received is assigned as the new revertzone and channel.• Last Used Revert: The last zone/ channel responded to is assigned as the newrevert zone and channel.• Selected: The last zone/ channel selected is assigned as the new revert zone andchannel.• Selected + Talkback: If the zone/ channel has been changed during Scan, the newlyselected zone/ channel is assigned as the new revert zone and channel. Thetransceiver “talks back” on the current receive channel.• Priority 1: If your dealer has programmed a Priority 1 channel, this channel is therevert zone and channel.• Priority 1 + Talkback: If your dealer has programmed a Priority 1 channel, thischannel is the revert zone and channel. The transceiver “talks back” on the currentreceive channel.• Priority 2: If your dealer has programmed a Priority 2 channel, this channel is therevert zone and channel.• Priority 2 + Talkback: If your dealer has programmed a Priority 2 channel, thischannel is the revert zone and channel. The transceiver “talks back” on the currentreceive channel.PRIORITY S CANA Priority channel must be programmed in order for Priority Scan to function.The transceiver will automatically change to the Priority channel when a signal isreceived on it, even if a signal is being received on a normal channel.• The indicator represents the Priority 1 channel.• The indicator represents the Priority 2 channel.• The indicator represents both the Priority 1 and Priority 2 channel.