Kenwood TK-780 Instruction Manual

Also see for TK-780 series: Programming instructions Instruction manual Service manual supplement Service manual Instruction manual

11■ Scanning Trunked SystemsWhen scanning trunked systems, the revert groups and the groups not lockedout of the scanning sequence are scanned. See “GROUP SCAN”, below.■ Scanning Conventional SystemsWhen scanning conventional systems, the revert groups and the groups notlocked out of the scanning sequence are scanned. See “GROUP SCAN”,below.■ Scan LockoutIf a programmable auxiliary key is programmed with Scan Del/Add, eachsystem can be locked out of the scan sequence manually. The deleteindicator (ooooo) will appear in the display when the selected system is lockedout.■ Scan RevertYou can select revert systems and groups using the System and Groupkeys.Three types of Scan Reverts which can be programmed by your dealer areavailable:• Last Called Revert: The last system/ group received is assigned as thenew revert system and group.• Last Used Revert: The last system/ group responded to is assigned asthe new revert system and group.• Selected: The last system/ group selected is assigned as the new revertsystem and group.GROUP SCANGroup Scan is available for both trunked and conventional systems. This featureis useful when more than one group is programmed in a system. Group Scan isset by your dealer on request. It scans the revert groups as well as groups thatare allowed to be scanned.When a call is received, the group indicator shows the group number, and thatgroup becomes the revert group. Simply press the PTT switch to respond to thecall.You can also perform Group Scan while using a priority channel. Please contactyour dealer for information concerning Priority Scan.