16■ Transmitting1 Select your desired system and group (or group and channel).2 Press the A key to enter Selcall Mode.3 Use the / keys (right side keys only) to select the ID of the stationyou want to call.• You can also enter digits by using the microphone keypad if Manual Dial isenabled. (Press to erase an incorrect digit.)4 Press the A or # key to enter Status Mode.5 Use the / keys (right side keys only) to select the status you want totransmit.• You can also enter digits by using the microphone keypad if Manual Dial isenabled. (Press to erase an incorrect digit.)6 Press the PTT switch to initiate the Status call.• “COMPLETE” is displayed when the call has been successfully transmitted.■ ReceivingThe mail icon ( ) will flash and a calling ID or text message will appearwhen a Status call is received.• The display alternates between the caller ID and the message.Press any key to return to Normal Operation Mode.■ Reviewing Messages in the Stack Memory1 Press and hold the A key for more than 1 second to enter Stack Mode.• The last received message is displayed with the message number. “S” (Status)appears with the number.2 Use the / keys (right side keys only) to select the message youwant to view (if more than one message is stored in the stack memory).3 Press the pppppC or Dooooo key to stop the message from auto-scrolling ifdesired. Also use these keys to scroll through the message manually.4 Press the SCN key to toggle between the message and the caller’s ID.5 To erase the message, press and hold the SCN key for more than1 second.■ Automatic Status ResponseIf you pre-select a status number and then leave the transceiver in StatusMode, the transceiver will automatically respond with that status numberwhen a request from the base station is received. (The base station requestfunction is optional.)