Kenwood TK-863G Service Manual
Also see for TK-863G: Brochure & specsBrochure & specsInstruction manualBrochure & specs
                                                        | |
Contents
|
9TK-863G Proceed ToneThis tone is output when the PTT button is pressed,transmission starts, and the repeater is connected to indi-cate that the user can talk if the clear to talk function hasbeen set. (The high tone is output for 100ms.) Free System Ringback Mode Tone, SystemSearch Mode ToneThis tone indicates that the transceiver is free systemringback mode or system search mode. (The mid tone isoutput for 400ms.) Ringing ToneThis tone indicates that the transceiver can use the re-peater in free system ringback mode. (The mid tone and notone are output eight cycles alternately in 50ms intervals.) System Search ToneSounds when the system changes during system search.You can select yes or no for the optional feature's warningtone. System Search End ToneSounds when a possible connection to a repeater in sys-tem search is not mode. You can select yes or no for theoptional feature’s warning tone.OPERATING FEATURES / REALIGNMENTREALIGNMENT1. ModesUser modePanel test modePC modeFirmware program-ming modePanel tuning modeData program-ming modePC test mode PC tuning modeRadio informationClone modeMode FunctionUser mode For normal use.Panel test mode Used by the dealer to check the funda-ment characteristics.Panel tuning mode Used by the dealer to tune the radio.PC mode Used for communication between theradio and PC (IBM compatible).Data programming Used to read and write frequency datamode and other features to and from the radio.PC test mode Used to check the radio using the PC.This feature is included in the FPU.See panel tuning.Firmware program- Used when changing the main programming mode of the flash memory.Clone mode Used to transfer programming data fromone radio to another.2. How to Enter Each ModeMode OperationUser mode Power ONPanel test mode [SCN]+Power ON (Two seconds)PC mode Received commands from PCPanel tuning mode [Panel test mode]+[SCN]Firmware programming mode [ ]+Power ON (Two seconds)Clone mode [ ]+Power ON (Two seconds)3. For the Panel Test ModeSetting method refer to ADJUSTMENT.3-1. For the Panel Tunning ModeSetting method refer to ADJUSTMENT. |
Related manuals for Kenwood TK-863G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine