Kenwood TK-880 Programming Instructions Manual

Also see for TK-880 series: Programming instructions Instruction manual Instruction manual Instruction manual Instruction manual

Contents

10Connecting the Pyramid to the Kenwood TK-x80Once all of the programming has been completed, it is time to connect the units to theradios.Connecting the 2012/Merlin MDT to the TK-x80 radioThe following are the pin outs for the KCT -19 option connector of the TK-x80 seriesradios. These connections must be made to the corresponding color-coded cable from the2012/Merlin. Install the KCT -19 "E" plug into CN-2.Connections: 2012/Merlin Function RadioBlack/Shield Ground KCT-19 Pin 6White Tx Audio Out KCT-19 Pin 9Blue On-Air Detect KCT-19 Pin 5Green PTT Out KCT-19 Pin 8Red Switched B+ KCT-19 Pin 7Yellow Rx Audio In KCT-19 Pin 4Violet COR KCT-19 Pin 11Grey Mic Mute/Channel Select N/CBrown Audio Mute Out N/CJumper Settings in the 2012/MerlinJ1 [Out] Tx audio levelJ2 [Out] Local PTT LoopConnecting the 2016 base to the TK-x80 radioThe following are the pin outs for the KCT -19 option connector of the TK-x80 seriesradios. These connections must be made to the corresponding color-coded cable from the2016. Install the KCT-19 "E" plug into CN-2.Connections: 2016 Function RadioBlack/Shield Ground KCT-19 Pin 6White Tx Audio Out KCT-19 Pin 9Blue On-Air Detect KCT-19 Pin 5Green PTT Out KCT-19 Pin 8Red Switched B+ KCT-19 Pin 7Yellow Rx Audio In KCT-19 Pin 4Violet COR KCT-19 Pin 11Grey Mic Mute/Channel Select N/CBrown Audio Mute Out N/C

/ 10

Related manuals for Kenwood TK-880 series