Kenwood TK-D240 User Manual

Also see for TK-D240: User manual User manual User guide User guide Service manual

17ADVANCED OPERATIONSEMERGENCY CALLSIf your transceiver has been programmed with the Emergency function, you canmake emergency calls.1 Press and hold the key programmed as [Emergency].• Ask your dealer for the length of time necessary to hold this key before thetransceiver enters Emergency mode.• When the transceiver enters Emergency mode, it will change to theEmergency channel and begin transmitting based on how it is set up byyour dealer.2 To exit Emergency mode, press the [Emergency] key again.• If the Emergency mode completes a preset number of cycles, Emergencymode will automatically end and the transceiver will return to the zone andchannel that was in use before Emergency mode was entered.Note:◆ Your dealer can set the transceiver to emit a tone when transmitting in Emergencymode.◆ Your dealer can set the transceiver to emit tones and received signals as normal, ormute the speaker during Emergency operation.Lone Worker ModeLone Worker Mode is a safety feature built into the transceiver. If the transceiver isnot operated for a pre-programmed period of time, the transceiver will emit a toneand automatically enter Emergency operation.Press the key programmed as [Lone Worker] to toggle the Lone Worker functionON or OFF.SCRAMBLERThe Scrambler function allows you to hold a conversation in complete privacy.When activated, any other party listening in on your channel will be unable tounderstand your conversation.Press the key programmed as [Scrambler] to toggle the Scrambler function ONor OFF.