Kenwood TKR-751 Modification Information
Also see for TKR-750: Brochure & specsService manualService manualFunction referenceService manual
                  | |
13 Modification Information (MOD) Version: 1.02 USA5 EXTRACTING RSSI SIGNAL FROM THE ACC 25-PIN D-SUB CONNECTORIt is possible to extract the RSSI signal from the pin 1 ofthe ACC 25-pin D-Sub connector (Default: NoConnection).Follow the procedures below to modify the connector.Note: The part number of the ACC 25-pin D-Sub connector is“E37-0904-05”.It must turn the power OFF before modifying the connector.1. Remove the FRONT PANEL of the TKR-750/850/751/851.Follow the steps 1 - 3 in “ 3.2 Installing the SC20-460“.2. Cut the connector 27-pin cable (CN606) located onthe printed board of the “E37-0904-05”.Note: Cut and remove the wire from the top of connector.3. Solder the wire to the RSSI land of the printed circuitboard.4. Reassemble the repeater after modifying theconnector.Connect the wire here. |
Related manuals for Kenwood TKR-750
manualsdatabase
Your AI-powered manual search engine