Kenwood TM-481A Instruction Manual

Also see for TM-281A: Instruction manual Service manual Instruction manual Service manual

Contents

59116 Press [MENU] to complete the setting and store thePower-on message.7 Press any key other than [MENU] to exit Menu Mode.Note: If a Power-on message is not set, the transceiver model nameappears when the transceiver power is turned ON.PROGRAMMABLE VFOTo limit the operating frequencies within a certain range,program the upper and lower frequency limits to theprogram VFO parameters. For example, if you select 144MHz for the lower limit and 145 MHz for the upper limit,the tunable range will be limited from 144.000 MHz to145.9975 MHz.1 While in VFO mode, press [F], [MENU] and turn theTuning control to select Menu No. 7 (P.VFO).• The current programmable frequency range for the bandappears.2 Press [MENU] and turn the Tuning control to selectthe lower limit frequency (in MHz).3 Press [MENU] and turn the Tuning control to selectthe upper limit frequency (in MHz).4 Press [MENU] to store the setting or any other key tocancel.5 Press any key other than [MENU] to exit Menu Mode.Note:◆ You cannot program the 100 kHz or lower digits.◆ The upper limit frequency cannot be set lower than the selectedlower limit frequency.