Kenwood TM-621A Instruction Manual

Also see for TM-621A: Instruction manual Instruction manual

4-5-5. Memory EntryMemory Entry must be done in MAIN band.@ Simplex/Normal SHIFT(M.ch 0~9, A and b)1. Press the VFO key toselect the VFO mode.2. Select the desired operatingfrequency, offset, tone fre-quency, etc. (For example146.100 MHz + shift)we mn{a aT RE3. Press the F key. The F in-dicator and the memorychannel indicator willright. (For example ch 8.)4.Select the desiredMemory Channel usingthe MAIN Tuning controlor the microphoneUP/DWN switches.Note: ———_________You must do this within 5seconds of pressing the Fkey, or the F indicator willturn off. If the indicatorgoes off, you must pressthe F key again.5. Press the MR/M keywithin 5 seconds of selec-ting the Memory Channel.Note: ———_____If the indicator goes off,you must press the F keyagain in order to completethe desired function.(uc owenae 8 Pe eeFc~!fea(we iimae i eeAfter pressing the MR/M key the F indicator and theMemory Channel number will turn OFF, and the transceiverwill return to the VFO mode.@ Odd Split Channels(M.ch C, and d)1. Press the VFO key toselect the VFO mode.2. Select the desired receiv-ing frequency, Tone fre-quency, etc. (For example147.430 MHz)23