Kenwood TM-D710GA Quick Start Manual

Also see for TM-D710GA: Instruction manual Instruction manual

1Quick-Start Guide for theKenwood TM-D710GAat MCACS Hospital StationsVersion 1.112/29/2019Figure 1A. Equipment case and set upHoly Cross Hospital Silver Spring maintains a Pelican case with two Kenwood TM-D710GAdual band FM transceivers. The TX/RX units are installed on a plate in the case. The powersupply is installed under the plate and wired to the TX/RX units. The operation panels (akacontrol heads), microphones, and speakers are stored under the plate with associated connectioncables. The antennas are wired to N connectors mounted on a wall plate. The antenna cableshave an N connector for the wall plate end and a PL-259 connector for the TX/RX end. Settingup is a matter of connecting the antenna cables, plugging in the operation panels and microphoneor headset, and plugging in the attached power cord. Finally, a laptop computer can beconnected to the operation panel.