Kenwood TS-590S Setting Manual

Also see for TS-590S: User manual Instruction manual Specifications Service manual Setting manual

Contents

194.7. Windows Firewall SettingsWith the host station PC, receiving connections from networks and the internet using theARHP-590 are blocked by the Windows firewall. When blocked, KNS operations aredisabled, so remove the block.Reference:Add the ARHP-590 to "exceptions" using the Windows firewall settings to release theblock.4.8. Comprehensive Security Software SettingsIf using comprehensive security software, it is necessary to adjust the settings so thatARHP-590 and ARCP-590 communications are not blocked. Perform the settings withreference to the user manual for the comprehensive security software used.4.9. Setting the Host Station Wait ModeClick the "Connections" button in the main window of the ARHP-590 on the host station.The indicator will light yellow and the remote station will enter connection request waitmode.If the audio transmission is speech, set the VoIP software to standby mode.4.10. Connecting to the Host Station from the Remote StationClick the "Connections" button in the main window of the ARCP-590 on the remote station.If the connection to the host station is successful, the indicator will light green.If the audio transmission is speech, connect the host station with the VoIP software too.