Kenwood TS-590S Setting Manual

Also see for TS-590S: User manual Instruction manual Specifications Service manual Setting manual

Contents

63.3. Host Station (Transmitter) ConfigurationTransceiver TS-590S The TS-590S transceiver is supported. The ARCP-590 and ARHP-590are specialized for the TS-590S, and so other transceivers cannot beused to configure the system.USBorRS-232CControls that change the frequency or mode are performed byconnecting the transceiver and PC using either a USB cable orRS-232C cable. (The transceiver has only one RS-232C terminal, so ifusing the RS-232C terminal for KNS operations, another devicecannot be connected.)ConnectionAudio Created by the customer.To transmit and receive audio, connect the wireless ACC2 terminal tothe PC sound I/O terminal. For the transceiver terminal specifications,refer to the device user manual, and for the cable creation andconnection methods, refer to "4.2. Connecting Audio Cables".Specifications CPU and memory:Minimum values recommended by the operating system.HDD:To install the ARHP-590, a minimum of approx. 100 MB of free diskspace is required. If storing connection logs, additional memory spaceis required.SoundfunctionTo transmit and receive audio, a sound function is required.PCNetworkfunctionConnects to the internal LAN.To perform KNS operations via the internet, connect to a network thatis connected to the internet.A cable network is recommended.Software OS Use Windows XP (SP3 or later), Windows Vista (SP1 or later, 32-bitversion only), or Windows 7 (32-bit or 64-bit version). Other operatingsystems are not compatible.(Transceiver control)TransceiverSound functionAudio transmissionVoIP software