Kenwood TS-590SG Manual

Also see for TS-590SG: Reference guide Setting manual Setting manual Instruction manual Instruction manual

Contents

08 EXPANSIVE APPLICATION SOFTWARE608.3.4 KNS (KENWOOD NETWORK COMMAND SYSTEM)As with ARCP-590 for the TS-590S, the ARCP-590G also enables control of the transceiver using KNS over LAN or theInternet. Install the ARHP-590G program to be hereinafter described on the host station PC to construct the system.Figure 8-4 Conceptual Image of a KNS ConfigurationThe ARCP-590G and ARHP-590G for the TS-590SG do not include the VoIP function to send and receive voice over thenetwork connection.In order to use VoIP capability, construct a system using ARVP-10H and ARVP-10R (explained later) or generic VoIP software.KNS Welcome Message function is added so that the KNS host administrator can leave a simple message to a KNS clientuser; or a KNS client user to the another KNS client user.The KNS welcome message can be edited or deleted either from ARCP-590G or ARHP-590G.In ARCP-590G, select the Edit KNS Welcome Message from the Tool pulldown menu and you can edit or delete thewelcome message in the Edit KNS Welcome Message dialog box.In ARHP-590G, select the Edit KNS Welcome Message from the Tool p ulldown menu and you can edit or delete thewelcome message in the Edit KNS Welcome Message dialog box.Figure 8-5 KNS Welcome MessageRefer also to TS-590SG KENWOOD NETWORK COMMAND SYSTEM Setting Manual on the following website.http://www.kenwood.com/i/products/info/amateur/software_download.html.Caution:◆ When using remote operation, or operating using the Internet, ensure you adhere to radio frequency, and other relevant lawsof the country or region in which the equipment is to be used.