Kenwood TS-590SG Setting Manual

Also see for TS-590SG: Reference guide Setting manual Instruction manual Manual Instruction manual

Contents

9Menu No. Function Set value70 Audio source of SEND/PTT transmissionfor data modeREARThe default setting is FRONT. In Addition, refer the section "4.1.1 Setting Up anAudio Input Route from the Rear Terminal" and selects USB connector to an audioinput route.4.3 ARUA-10 SettingsFollow the steps below to set up the ARUA-101) Connect the TS-590SG and computer using a USB cable.2) To launch the software, select Start Button > Programs > Kenwood > ARUA-10.3) After launching the ARUA-10, a “Task Tray” icon appears. Right click this iconand select “Device Settings” from the menu. The window shown below appears.In this window you can specify sound devices for the transceiver’s audio receptionoutput and modulated audio input. You can also specify which microphones and4)12)13)7)5) 6)