Kenwood VR-50RS Instruction Manual

32 ENFor your recordsRecord the serial number, found on the back of the unit, in the spacesdesignated on the warranty card, and in the space provided below. Referto the model and serial numbers whenever you call upon your dealer forinformation or service on this product.Model_____________________ Serial Number_____________________Specifications Caution : Read this page carefully to ensure safeoperation.AUDIO sectionRated power output during STEREO operationEffective power output during SURROUND operationFRONT (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)............................................................................... 100 W + 100 WCENTER (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven).............................................................................................. 100 WSURROUND (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)............................................................................... 100 W + 100 WSURROUND BACK (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channeldriven) (VR-60RS) ............................................................... 100 WTotal harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)Frequency response (IHF‘66)CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD ................................................................................. 95 dBInput sensitivity / impedanceCD/DVD, DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2.............................................................................. 550 mV / 47 kΩOutput level / impedanceMD/TAPE REC ....................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩPRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩCOMPONENT VIDEO inputs/outputs (VR-60RS)COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal) ............... 0.64 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivityMONO ...... 1.3 μV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ..................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .......................................................... 0.5% (71.2 dBf input)STEREO ....................................................... 0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ........................................................ 75 dB (71.2 dBf input)STEREO ..................................................... 68 dB (71.2 dBf input)Stereo separation (1 kHz) ........................................................... 40 dBSelectivity (±400 kHz) ................................................................. 70 dBFrequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range ..................................... 530 kHz ~ 1,700 kHzUsable sensitivity (30% mod., S/N 20 dB) ........ 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input).......................................................... 50 dB (60 dBμV EMF input)GENERALPower consumption .................................................................... 2.2 AStandby Power consumption ................................... less than 0.4 WAC outletSWITCHED ......................................... (total 150 W, 1.25 A max.)Dimensions .................................................... W : . 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net) ................................................................. 7.7 kg (17.0 lb)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).100 watts per channel minimum RMS, both channels driven, at 8Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

/ 32

Related manuals for Kenwood VR-50RS