Kenwood VR-6050 Instruction Manual

Also see for KRF-V6060D: Instruction manual Service manual Service manual

Contents

Kenwood VR-6050 Instruction Manual Manual pdf 17 page image

Setting up the systemConnecting the system control Preparing the remote controlConnecting system control cords after connecting a KENWOODaudio component system lets you take advantage of convenientsystem control operations.Loading the batteries0 Remove the cover. 0 Insert the batteries.This unit is compatible only with the [SL-161 mode. The systemcontrol operation is not available if the unit is connected in the[XS81, [XSI, or [XRI connection mode.If your component has the mode select switch, set the connectedcomponents to the [SL161 mode.c--EmlQ Q SYSTEM CONTROLcordQ Close the cover.l Youmaycoi?nectthesystemcontrolcordtoeithertheupordown]ackEXAMPLE: [SL161 mode connectionsThe underlllxd portlon represents the setting of the system control modeE!351I=1 [XSI IXS81 [XRI[WI [XSI fXS81ReceiverCassette deckBSYSTEMor MD recorder CONTROLcordCD playerl Insert two AA-size (R6) batteries as lndlcated by the polarity markings.Operation[XSI piiizzyl In ordel to take advantage of the system control operations, thecomponents must be connected to the correct jacks. To use a CDplayer It must be connected to the CD jacks. To use a cassette deck(or MD recorder) it must be connected to the MD/TAPE lacks Whenusing Imore than one CD player (etc 1only the one connected to thespeclfled jacks may be connected for system controll Some CD players and cassette decks are not compatible with thelSL161 system control mode Do not make system connectlons withequlplnent that IS not [SL161 compatiblel Some MD players are not system control compatible You cannotmake system control connectlons to this kind of equipment.When the STANDBY Indicator IS llt, the power turns ON when you pressthe POWER IO) key on the remote control. When the power comes ON,press the key you want to operate.Operating rangeWvWifRemote sensor1systemNotes1 ISL161 eqtrlpment cannot be combined with [Xi?], IXSI, and IXSSIequipment for systeln operations. If your equipment consists ofthis kind of combination, please do not connect any system con-trol cords Even wlthout system control cords, normal operationscan be carried out without effecting performance.2 Do not connect system control cords to any components otherthan those spectfled by KENWOOD It may cause a malfunctionand damage your equipment3 Be sure the system control plugs are Inserted all the way in to thesystem control tertnlnalsl When pressing more than one remote control key successively, pressthe keys securely by leaving an Interval of 1 second or more betweenkeys.SYSTEM CONTROL OPERATIONSRemote ControlLets you operate this ul?lt with the system remote supplled with thereceiverAutomatic OperationWhen you start playback from a source component, the Input selectoron this unit switches to that component automatlcally.Synchronized RecordingLets you synchrorxze recording with the start of playback whenrecording from CD, MD or analog discsRegistering setup codes for KENWOOO audio componentsIf you own remote controllable KENWOOD audio components thatale not compatible with system control, registering the setup codeenables you to control those components using the remote controlsupplied wIti this unit (wIthout connecting system control cords) Toregister setup codes for your remote controllable KENWOOD audiocomponents, see “Registering setup codes for other components”Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2 When the remote-controllable distance gets shorter than before, re-place both batteries with new ones3 Placlng the remote sensor in direct sunlIght, or in direct light from ahigh frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation to pre-vent malfunction17EN