Kenwood VRS-5100 Instruction Manual

Also see for VRS-5100: Service manual

28 EN96kHz LPCM playbackThe receiver is compatible with the 96kHz LPCM playback. To play a96kHz DVD, set the listen mode to “STEREO”.• In FULL AUTO input mode, the listen mode will automatically beSTEREO.• When in D.MANUAL input mode (listen mode is not STEREO), “FS96kHz” will appear in the display and no sound can be heard from thespeakers.Press the LISTEN MODE key (the listen mode changes to the STEREOmode) to output sound from the speakers.Display dimmer adjustmentThe dimmer function lets you select the brightness of the amplifier'sdisplay. You might find this useful if you darken your room to watchmovies or listen to music.1 Press the SETUP key to enter the SETUP mode.2 Use the MULTI CONTROL∞/5 keys or TRIM∞/5 keys to selectthe “DIMMER”.3 Press the SETUP key again so that the dimmer setting indicationappears.Select the brightness level you find most pleasing using MULTICONTROL∞/5 keys or TRIM ∞/5 keys.1 DIMMER H : Bright2 DIMMER L : Dark4 Press the SETUP key to return to the “DIMMER”.5 Use the MULTI CONTROL∞/5 keys or TRIM∞/5 keys to selectthe “EXIT”.6 Press the SETUP key to return to the input indication.MUTEDOLBY DEX NEO:6 DSP TS DIGITAL ST. AUTO LLFE SWC RDOLBY PLIIDTS -ES AACDISCRETEMATRIX 6.1ACTIVE EQ. LS S BS RSSleep timer (SLEEP)Set the number of minutes after which the unit to be turned OFF.Connect the related component under reference to “Connectingaudio components”.Press the SLEEP key to select the time.• Each press increases the timer period by 10 minutes.The sleep timer can be setup to 90 minutes.10 = 20 = 30 = .... = 80 = 90 = OFF = 10 = 20 = ....The sleep timer indicator will be lit.• Press the SLEEP key while the sleep timer is activated to check theremaining time.To cancelTurn the amplifier OFF or press the SLEEP key until the sleep time iscancelled.Convenient functions