Kenwood XD-852 Instruction Manual

Contents

Kenwood XD-852 Instruction Manual Manual pdf 10 page image

XD-SERIES (EN/M,T)10Preparation sectionSurround speakers system (supplied)1 2 3Twist4TwistSpeaker UnitMain Unit1 2 3 4Hanging on a wallThe speakers can be hung on a wall by using the wallhanging holes on the back of the speaker.When hang-ing the speakers, select a rigid and hard place on thewall which can withstand the weight of the speakers.1. Install a screw with sufficient strength on the wall.When screwing in, leave the head and upper stem ofthe screw projected by 7 to 9 mm from the wallsurface.2. Hang the speaker by inserting the screw into the wallhanging hole on the upper rear side of the speaker.Check that the speaker are firmly mounted.Recommended speaker installationIt is recommended that the surround speakers are in-stalled straight to the left and right of the listeningposition or slightly behind, at a height of about 1meter higher than the listener’s ears. Each surroundspeaker should be installed so that the longer sidesare horizontal.How to use the speaker stabilizer (cushions)When the surround speaker system installation is un-stable due to the floor condition, apply the provided sta-bilizer (cushions) on four positions on the bottom ofeach speaker.Connection of the surround speakers (XD-6...series, XD-8...series)CAUTION Note on ConnectionConnect the components as shown in the diagram.Only plug the power cord into a power outlet once connectionsare completed. The rear panel configuration is variable depending on the models (countries or area).Center speakerSurround speaker Surround speakerCENTER SPEAKER(6-16Ω)SURROUND SPEAKERS(12-16Ω)+-LR− +− +− +· ª· ª · ªSystem connectionBefore connecting the surround speakers system, be also sure to read “Surround function” and “Surround setting”.TY÷ Before installation, check the wall or ceiling well toconfirm that it is strong enough to withstand theweight of the speaker. KENWOOD cannot assume theresponsibility against accidents caused by the drop ofspeaker due to insufficient mounting strength or to anydefect in installation.÷ The wall hanging screw is not provided. Please preparea screw that can assure enough mounting strengthaccording to the material and thickness (structure) ofthe wall where the speaker is to be hung.÷ If the material or thickness of a wall or ceiling cannot beconfirmed, consult a professional specialized ininstallation.