Preparation sectionXD-SERIES (EN/M,T)7System connectionConnection of the system accessoriesThe supplied antenna is for indoor use. Place it as faras possible from the main system, TV set, speakercords and power cord, and set it to a direction whichprovides the best reception.The accessory antenna is for temporary indoor useonly. For stable signal reception we recommend us-ing an outdoor antenna. Remove the indoor antennaif you connect one outdoors.1 Connect to the antenna terminal.2 Locate the position providing good recep-tion condition.3 Fix the antenna.FM indoor antennaAM loop antennaCAUTION Note on ConnectionConnect the components as shown in the diagram.Only plug the power cord into a power outlet once connectionsare completed. The rear panel configuration is variable depending on the models (countries or area).1 2 3Assemble.GNDFM75ΩAMANTENNAGNDFM75ΩAMANTENNAAccessoriesFM indoor antenna(1)AM loop antenna(1)Speaker cordsRemote control unit (1)Batteries (R6/AA) (2)UnpackingUnpack the unit carefully and make sure that all accessoriesare put aside so they will not be lost.Examine the unit for any possibility of shipping damage. Ifyour unit is damaged or fails to operate, notify your dealerimmediately. If your unit was shipped to you directly, notifythe shipping company without delay. Only the consignee(the person or company receiving the unit) can file a claimagainst the carrier for shipping damage.We recommend that you retain the original carton andpacking materials for use should you transport or ship theunit in the future.Keep this manual handy for future reference.Use to adapt the plug on the power cord tothe shape of the wall outlet.(Accessory only for regions where use isnecesary.)AC plug adaptor (1)Provided in the speaker packageXD-6...seriesXD-8...series XD-7...seriesSurround speaker (2)Speaker cord (2)Speaker stabilizer (8)Surround speaker system (Except for XD-7...series)XD-6...series, XD-8...series (2)XD-7...series (4)Center speaker (1)Speaker cord (1)Speaker stabilizer (4)