Kenwood XD-9580MD Instruction Manual

Contents

Kenwood XD-9580MD Instruction Manual Manual pdf 39 page image

XD-9580MD (En)R.D.S.3 9Application sectionRDS is a system which transmits useful information (digi-tal data) for FM broadcasts together with the broadcastsignal. Tuners and receivers designed for RDS receptioncan extract the information from the broadcast signal foruse with various functions such as automatic display ofthe station name.R.D.S. (Radio Data System)This unit is equipped with the following functionsutilizing RDS data :PTY (Program Type Identification) Search : ‚The tuner automatically searches for a station which is currently broad-casting a specified program type (genre).PS (Program Service Name) Display : (See below.)When an RDS broadcast is received, the station name is automaticallydisplayed.EON (Enhanced Other Network) : wWhen the information to be received is set in advance and any RDSstation in the same network starts broadcasting of such information, thereception automatically will be switched to that station.PTYMUSIC CALENDARPGM MEMO EDIT TA NEWS INFO. TOTAL SPACEDISC ALLkHzMUTE12PROG. N.B.1 2 3 4 511 12 13 14 1516 17 18 19 206 7 8 9 10MAXSLEEP O.T.T. ECHO P.B.C. MANU.VOL.RDS EON TPAUTOTUNED STEREOMHz) 1 F M 1 ) 2 5. )EQ.ONThe “RDS” indicator lights up when anRDS broadcast (signal) is received.÷ Some functions may not be provided or be given differentnames depending on countries or areas.To switch the display contentsRDS DISP.Pressing the RDS DISP. key changesthe display contents.kHzMHzTA NEWS INFO.EON TP PTYMUSIC CALENDARPGM MEMO EDIT TOTAL SPACEDISC ALLMUTE12PROG. N.B.1 2 3 4 511 12 13 14 1516 17 18 19 206 7 8 9 10MAXSLEEP O.T.T. ECHO P.B.C. MANU.VOL.RDSAUTOTUNED STEREOB B C 1 F M@EQ.ONTA NEWS INFO.EON TP PTYMUSIC CALENDARPGM MEMO EDIT TOTAL SPACEDISC ALLkHzMUTE12PROG. N.B.1 2 3 4 511 12 13 14 1516 17 18 19 206 7 8 9 10MAXSLEEP O.T.T. ECHO P.B.C. MANU.VOL.RDSAUTOTUNED STEREOMHz- - F M 1 ) 2 5. )EQ.ONDisplay mode priority rankingWhen an RDS broadcast is received1 PS (Program Service Name) Display :When an RDS broadcast is received, the station nameis automatically displayed.If no PS data was sent, “NO PS” is displayed.2 Frequency Display :The frequency of the current station is displayed.Before using RDSFor reception of RDS stations, the auto presetting function must be used to preset the stations. With the auto presetting function, RDSstations are preset with priority. “NO DATA” will be flashed when a station is not preset by auto presetting.Set the reception band to FM. Preset RDS stations with the auto preset function. §