Kenwood XD-9580MD Instruction Manual

Contents

Kenwood XD-9580MD Instruction Manual Manual pdf 71 page image

XD-9580MD (En)7 1Preparation sectionBasic sectionApplication sectionKnowledge sectionsAdjust the clock before setting the timer.Timer operationTimer operationOperate easy To use Timer (O.T.T.)Playback of the selected input source starts at the specified time, and the unit is switched off (STANDBY) after one hour. Thistimer operates only once directly after setting.Sleep timer (SLEEP)The unit is turned OFF (STANDBY) automatically after the specified period has elapsed.Timer playback, timer recording (PROG.1, PROG.2)With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously settime period.AI timer playback (PROG.1, PROG.2)Operate easy To use Timer (O.T.T.)Timer playback is possible simply by setting the time.The source selected last before the unit was switched off(STANDBY) will be played. One hour after start of timer play-back, the unit will be switched off (STANDBY) automatically.1 Select the source to be played.2 Press the O.T.T. key.3 Set the ON time.4 Press the ENTER key.The time isreturned.The time isadvanced.÷ Timer playback for a CD is possible only when the CD is set intothe tray No. 1.÷ When the O.T.T. key is pressed, the input source and the ONtime are displayed.÷ The ON time can be set in steps of 5 minutes.÷ In case of combination with another timer, the input sourcewhich has operated last will be played back.÷ O.T.T. timer setting is possible even when the unit is OFF(STANDBY).Press the O.T.T. key twice.To cancelON time displaySleep timerSet the number of minutes after which the unit is to beturned OFF (STANDBY).1 Turn the unit ON.2 Set the time.Turn the unit OFF (STANDBY) or press the SLEEP key un-til the sleep time is cancelled.To cancel÷ The unit is turned OFF (STANDBY) automatically after the settime has elapsed.÷ Each press decreases the time by 10 minutes. The maximumtime that can be set is 90 minutes.90=80=70...30=20=10=Cancel=90=80...Duration for sleep timerLightsThe MD operates on the basis of the information readfrom the disk into memory.Before timer setting with the MD, leave the unit ON for10 min. or more to make the memory backup functioneffective. ANoteNoteEach press switches the modes as follows.1 “O.T.T.” lit........... The timer is used.2 “O.T.T.” not lit.... The timer is not used.The volume increases gradually after start of timer playback,and it stops at the volume preset in the factory.The program timer does not operate until the end ofoperation of the O.T.T. timer.5 Switch OFF (STANDBY) the unit sup-ply.ON / STANDBYENTERTUNINGUPDOWNO.T.TSLEEPPGM MEMOAUTOTUNEDDISC ALLSTEREOEDITVOL. MUSIC CALENDARRDS EON TA NEWS INFO. TP PTY TOTAL SPACEkHzMHzMUTE12PROG. N.B.1 2 3 4 511 12 13 14 1516 17 18 19 206 7 8 9 10MAXSLEEP ECHO P.B.C. EQ.ON MANU.A M 7 ): )O.T.T.12 13 14 1516 17 18 19 20O.T.T. ECHO P.B.C. MANU.MAXPGM MEMO EDITAUTOTUNEDDISC ALLSTEREORDS EON TA NEWS INFO. TP PTY TOTAL SPACE MUTE12PROG. N.B.kHzMHzVOL. MUSIC CALENDARs L E E P 9 )1 2 3 4 56 7 8 9 10SLEEP EQ.ON11