46OperationsXD-DV series (EN/K,M,T,X,Y)/2CD Program Recording (TAPE B only)1PreparationSelect reverse mode eSelect tape transport direction, thenpress the STOP ( 7) key. e2MAIN UNITPlayback a disc, then press the STOP( 7) key.REMOTEMAIN UNITREVERSE MODETAPE B23STOP723TAPE BSTOP3REMOTEMAIN UNITEdit program4See “Preparation” on page 44.STOP7DVD/CDSTOP6DVD/CDSHIFTEQDVD PGMPress the REC/ARM key5REMOTEREC/ARMMAIN UNIT1 “ ” : The recording will end and the tape will stop at theend in reverse direction, no matter whether record-ing was started in forward direction or in reversedirection.2 “ ” : In recording mode, this is the same as “ ”.3 “ ” : Record stops after having recorded one side of tape.Each press switches the modes as follows÷ If the tape transport direction is opposite to the desired direction,press the play key corresponding to this.Tape direction indicators ofcurrently selected deck.LitSee page 28This unit can only use tape for the normal position (Type I ).CD Program recording is not possible for VCD, DVD discs.
