36 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642UBluetooth SetupRegistering Bluetooth deviceTo make your Bluetooth device (cell-phone) usablewith this unit, you need to register it (pairing). Youcan register up to five Bluetooth devices to this unit.When registering from Bluetooth devices1 Turn on the control unit.2 Start registering a unit by operating theBluetooth deviceBy operating the Bluetooth device, register thehands-free unit (pairing). Select “KENWOOD BTCD/R-2P2”/ “KENWOOD BT200” from the list ofconnected units.3 Enter a PIN codeInput the PIN code registered as mentioned in (page 36).Check that registration is complete on theBluetooth device.4 By operating the Bluetooth device, start hands-free connection.When registering from this unit1 Select Bluetooth device registration modeSelect “MENU” > “Device Regist”.For how to select Function Control item, refer to (page 6).2 Enter Bluetooth device registration modePress the Control knob for at least 1 second.Search for the Bluetooth device.When search is completed, “Finished” is displayed.3 Select the Bluetooth deviceTurn the Control knob and push the centerwhen the desired Bluetooth device is displayed.4 Input the PIN codeOperation type OperationSelect the numbers. Turn the Control knob or push it towardsup or down.Move to the next digit. Push the Control knob towards right.Delete the last digit. Push the Control knob towards left.5 Transmit the PIN codePress the Control knob for at least 1 second.If “Pairing Success” is displayed, registration iscompleted.6 Return to the device listPress the Control knob.7 Exit Bluetooth device registration modePress the [FNC] button.⁄• This unit allows up to eight digits to be input for a PINcode. If a PIN code cannot be input from this unit, it canbe input from the Bluetooth device.• If there are 5 or more Bluetooth devices registered, youcannot register a new Bluetooth device.• If the error message appears even though the PIN codeis correct, try (page 36).Registering Special Bluetooth deviceAllow registration of a special device that cannot beregistered normally (pairing).1 Select Special device registration modeSelect “MENU” > “SPCL DVC Select”.For how to select Function Control item, refer to (page 6).2 Enter Special device registration modePress the Control knob for at least 1 second.A list is displayed.3 Select a device nameTurn the Control knob and push the centerwhen the desired device name is displayed.If “Completed” is displayed, registration iscompleted.4 Go through the procedure of Bluetooth device> (page 36) and complete theregistration (pairing).Cancelling Special device registration modePress the [FNC] button for at least 1 second.⁄• If the device name is not in the list, select “Other Phones”.Registering PIN CodeBy operating the Bluetooth device, specify the PINcode necessary for registering this unit.1 Select PIN code edit modeSelect “MENU” > “PIN Code Edit”.For how to select Function Control item, refer to (page 6).2 Enter PIN code edit modeFunction of KDC-X993KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory)
