Kenwood eXcelon KDC-X993 Instruction Manual

Also see for KDC-HD942U: Instruction manual Service manual

Kenwood eXcelon KDC-X993 Instruction Manual Manual pdf 6 page image

6 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642UFunction ControlFunctions in the table below can be set up by using Function Control.1 Enter Function Control modePress the [FNC] button.2 Select a Function group.Push the Control knob towards right or left.Pushing the Control knob towards left allows youto set the preference items (“MENU”, “SETUP”, or“SOUND”).Pushing the Control knob towards right allows youto set the currently selected source function itemON/OFF.3 Select your desired setup itemOperation type OperationMovement between items Turn the Control knob.Selection of item Press the Control knob.Return to previous item Press the [FNC] button.Select “Return” at the bottom of the item list.Repeat selection and determination until yourdesired setup item is selected.Example:In this manual, the above selection isindicated asSelect “MENU” > “DEMO Mode”.Each item’s ”&” will be ”✓” when the source functionis set to ON.4 Make a settingPush the Control knob towards up or down.Press the Control knob to set the source functionitem ON/OFF.• Some items require you to keep pressing theControl knob for 1 or 2 seconds so that you canmake a setting. For these items, the time duringwhich you need to keep pressing the Controlknob is displayed in the Entry column in seconds.• For the functions accompanied by thedescription of the setting procedure and so forth,the reference page numbers are displayed.5 Exit Function Control modePress the [FNC] button for at least 1 second.Displayed item is depending on currently selectedsource or mode. The mark in Condition columnshows the condition to which the item is displayed.: Can be set in other than standby state.: Can be set in standby state.: Can be set while Audio file source of CD/USB/iPod.: Can be set while Audio file source of CD/USB(excluding iPod).: Can be set while CD/ Disc changer source.: Can be set while CD source.: Can be set while Disc changer source.: Can be set during Tuner source.: Can be set during FM reception.: Can be set while accessing AUX source.: Can be set while HD Radio source.: Can be set during Satellite radio source.: Can be set only during playback of the iPod source.: Can be set for sources other than the standbysource by setting “2 ZONE” of

28) to “ON”.: Can be set while a cell-phone is connected.: Sets “ILM MSC SYNC” in the menu to “OFF”.: Refer to the reference page.— : Can be set during all sources.The Control knob is used for entry, but how to usethe knob varies depending on the setting items.: Press the Control knob to switch the settings.: Push the Control knob towards left or right toswitch the settings.: Turn the Control knob to switch the settings.1 sec. : Press the Control knob for 1 second to enter intothe setting mode.2 sec. : Press the Control knob for 2 seconds to enter intothe setting mode.⁄• Refer to the respective page for information on how to setthe items with reference page number.• Only the items available to the current source are displayed.• The “SOUND” setting cannot be performed while the DualZone function is used.*Factory setting* Function of KDC-X993.* Function of KDC-X693.* Function of KDC-X693 with KCA-BT200.* Function of KDC-MP642U.* Refer to (page 48).