Kenwood krf v5080d Instruction Manual

Also see for krf v5080d: Instruction manual Instruction manual Service manual

22 ENPresetting radio stations manuallyMULTI CONTROLMEMORY1Tune to the station you want to store.2Press the MEMORY key while receiving the station.3Use the MULTI CONTROL knob or MULTI CONTROL %/ fikeysto select one of the station presets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the previous stationwill be replaced by the new one.Receiving preset stationsTUNERNumeric keys1Press the TUNER key to select tuner as the source.2Enter the number of the preset station you want to receive(up to “40”).Press the numeric keys in the following order:For “15”, press ................................ 0, 5For “20”, press ................................ 0, 0, )• If you make a mistake entering a two digit number, press the +10key repeatedly to return to the original display and start again.Receiving preset stations in order (P.Call)TUNERP.CALL4 / ¢1Press the TUNER key to select tuner as the source.2Use the P.CALL 4¥¢keys to select the desired station.• Each time you press the key, another preset station is received inorder.Pressing the P.CALL ¢ does the following:Pressing the P.CALL 4 does the following:Holding down the P.CALL ¢ or 4 key, lets you skip throughthe presets, receiving each preset station at 0.5 second intervals.Listening to radio broadcastsProceed to step 3 within 20 seconds.(If more than 20 seconds elapse, press the MEMORY key again).Blinks for 20 seconds